Complete the answer with the missing sequencers by gragging them into the correct area. Blank 1 Вопрос 1To begin , the clay used to make the bricks is dug up from the ground by a large digger. This clay is then placed onto a metal grid, which is used to break up the clay into smaller pieces. A roller assists in this process. Blank 2 Вопрос 1Following this, sand and water are added to the clay, and this mixture is turned into two differing types of brick by either placing it into a mould or using a wire cutter. Blank 3 Вопрос 1Next , these bricks are placed in an oven to dry for 24 – 48 hours.In the Blank 4 Вопрос 1subsequent stage , the bricks go through a heating and cooling process. They are heated in a kiln at a moderate and then a high temperature (ranging from 200c to 1300c), Blank 5 Вопрос 1followed by a cooling process in a chamber for 2 – 3 days. Blank 6 Вопрос 1Finally , the bricks are packed and delivered to their destinations.